Biller/2022/09/22/IMG_6230.jpg

Advance Marine Gearbox 16A Helical 1800r/min 1:1 bis 20:1 880nm, 880nm 2000rpm

Advance Marine Gearbox 16A Helical 1800r/min 1:1 bis 20:1 880nm, 880nm 2000rpm

please make it as ap
Manufacturer Directory Y2 series 380V 50HZ AC induction electric motor
3 Piece/s US $ 367
Let's see. I'm interested in the motors. 3 kW 1000 rpm 100 pieces and 5.5 kW 1500 rpm is 100 pieces. What is your best price?
The best EXW price of 3KW 1000RPM is USD183 per piece,the best EXW price of 5.5KW 1500RPM is USD195 per piece.
It doesn't include freight.Do you want to ship it by sea or by air?
the first order will be 100 pieces of each model. if all goes well, the second ordering will be at least 2-3 times more.
The weight of 3KW motor is about 65kg,the weight of 5.5KW motor is about 70kg.
it's too hard. the motors that we use now weigh 29 kg and 43 kg.
weight greatly affects the price of shipping. shipping of your engines will be 2 times more expensive than those we use now.
Hello, please send me an offer for: 12V, n=up to 1(2) 2 NM Best regards Torsten Moeser
12v dc worm gear motor,12v dc gear motor,worm gear motor
US $
20W and a speed of 2 turns per minute
If you want to ship by sea,the total freight is USD 380.
I'm building a prototype machine, in China, and need ONE motor. In the future, if things work out, I will buy more, but for now, I cannot promise anything--I can only ask for one. if that is okay, please read on.
I need a variable speed motor and a drive controller--approximately 1.5 hp. It should be all stainless, and sealed/encapsulated for washdown. If you have a servo motor, that is also good. I need a dial control, so I can adjust speed, maximum speed being about 3600 RPM. The torque doesn't matter--just as much as possible.
I need the motor to be as small as possible, with input voltage will allowing either 110 volts or 230 volts.
Can you supply such a motor? Right now I'm using a 1.5HP LEESON 3490RPM 143TC TEFC 3PH WG SST MOTOR 121879, but I'm willing to upgrade to a servo motor, if it will be more compact. I need the motor in China, not in the USA, so I'm contacting you
My goal is variable speed, compact, 112/230 input voltage. If possible, it would be nice if the motor had a deacceleration brake, so that it stopped quickly, after it was powered down.
we have requirement for gear as below,
REDUCTION GEAR (COMPACT TYPE) 1000KW. INPUT 1200RPM,
NOS
1

Advance Marine Gearbox 16A Helical 1800r/min 1:1 bis 20:1 880nm, 880nm 2000rpm

OUT PUT 6.5RPM, WITH ALL ACCESSORIES, CHINA
The maximum input RPM of in-line gear-reducer is 3000RPM
That is far from enough. I was inquiring about gear reduction from maybe 10000RPM or more.
I need your recommendation about permanent magnet motor product to replace our old induction motor. our current induction motor spec : 1. Output power : 100 kWatt 2. Full load Speed : 3000 RPM 3. Full load Torque : 350 N.M 4. Input Voltage : 380 VAC (50 Hz) 3 Phase Please kindly to send quotation, detail electrical and Mechanical specification and brochure to my email at Dës E-Mail Adress ass Stöberen geschützt. Du muss Javascript aktivéiert et zu Vue. Thank you and best regards Eko

Three Phase 380 VAC permanent magnet motor.
I’m interested in your product Specially used for 06 type marine transmission gearbox, I would like some more details.
Motor mit je 2Stk Handsender
High speed automatic industrial garage door opener with overheat&overload protection
4 Piece/s US $ 150
We are interested in the side door gragage opener for our canadian market with access entry and remote control for commercial and residentional
I would like to request a sample.
please ship me a sample of 12v motor with gearbox... rpm between 50-80rpm. 7/8" solid shaft.
Dc motor with gearbox 12v,gearbox 12v,dc motor with gearbox 12v supplier
1 Piece/s US $ 57
I am looking for a 12-24v dc motor- worm gear 90* 7/8" shaft 1000 inch pounds of torque. out door rated - reversible.
High torgue fancooled 1 hp 24v dc motor with gearbox gear motor 0.75KW
US $
Parameter GY 40
High speed automatic industrial garage door opener with overheat&overload protection
4 Piece/s US $ 150
Thank you very much for your mail showing interest to do business with us. We are grateful for your kind consideration.
This is Moazzem Uddin Talukder, the General Manager of Mart Overseas Ltd. replying you on behalf of our Honable Managing Director.
Right at this moment we are looking for a supplier of 15KV SF6 circuit breaker for Bangladesh Power Development Board. Details are as per attached spec. Kindly check whether you may supply the item or not. Definitely we shall visit your web but since we are not very much specialized in Circuit Breaker so you may ask your Engineers/Production People to check the matter and let us know.
I have an inquiry for 3 Phase Motor and gearbox; 75KW,380V, 50Hz,IP 54; QTY 6.
compitable with VFD Drive.
Vertcal mounting; connected to an axial fan.
Please quote with your best prices.
Merci
2016 China Bonfiglioli Double reduction zlyj gearbox with spare parts
1 Piece/s US $

Advance Marine Gearbox 16A Helical 1800r/min 1:1 bis 20:1 880nm, 880nm 2000rpm

Hello, I require a motor with reducer of 1hp up to 70 rpm that works at 12v dc, what is the price, thanks for your kind attention. What is the shipping cost to Miami (Florida) U.S.
Do you have 12VDC, 200W, 600 rpm gear motor? If have send me the sample price.
We need the following products:
1. Electric concrete mixer in 220-230V/60HZ
CE Zertifizéiert
French plug
2. Gasoline termal concrete mixer
Gasoline engine normally in Horse Power
No CE needed
Merci fir Är Äntwert.
The best EXW price is
63L USD748
130L USD803
160L USD825
200L USD880
the problem is is fits a 12v vehicle
1. Electric concrete mixer in 220-230V/60HZ
CE certified motor
French plug
63L USD570
130L USD740
160L USD800
200L USD830
2. Gasoline termal concrete mixer
Gasoline engine normally in Horse Power
No CE needed
63L USD758
130L USD813
160L USD835
200L USD890
Information of package: Fumigation stamped plywood box.
Minimum order quantity: one piece.

you can send me the tecnical file of that motor, which according to whichyou send me should be a little bigger as well as gearbox, thanks
in the attached file"DC + geared + motor.pdf" I can not observe the engine 2 hp to 12v dc, I only see 24v dc, you cant claryfi that it, thanks.
Please find the photographs of geared motor.
We need this electric motor 7,5kW / 1440rpm / Inverter Duty Motor / DC brake .
Do you have keep stock for this electric motor ?
Please send to us the quotation accordingly
We need a 25 Nm rated torque gearbox.
60 rpm 12v DC with worm gear
100W - 150 W options
Sorry 230 W
Do you have a 250W option?
60 rpm's (12 V)
Please check the new quotation.
Our package for electric concrete mixer and gasoline concrete mixer is
80L : 70cmX 60cm X 50cm
120L: 70cm X 60cmX 50cm
160L: 80cmX70cmX70cm
200L: 80cmX70cmX70cm
Our standard frequency is 50HZ,we don't have 60HZ CE.But we can change 50HZ to 60HZ.
For price,if your quantity is larger, we can give you some discounts.
please ship by air.
is the speed 60 rpm.
do you have the spec sheet?
any pictures or drawings
I need to buy this kind of gearboxes for my project.
I need 25:1 gear ratio and output torque capability of 200Nm is enough. Also output shaft diameter must be at least 30mm.
Can you please send me details and quotation for matching gearbox.
It is not for Continuous operation. I use a NEMA 34 12Nm motor. It is used for a pick and place mechanism
Hi, I would like to know the price for MOTOVARIO equivalent helical gear Parallel Shaft helical reduction motor gearbox for sand making machine. I am interested in buying 1 Set/Sets. contact directly at Dës E-Mail Adress ass Stöberen geschützt. Du muss Javascript aktivéiert et zu Vue. Gitt eis w.e.g. eng Devis. Merci.
MOTOVARIO equivalent helical gear Parallel Shaft helical reduction motor gearbox for sand making machine

Advance Marine Gearbox 16A Helical 1800r/min 1:1 bis 20:1 880nm, 880nm 2000rpm

I’m interested in your product electric portable Wheelbarrow-style Mini Concrete Mixer 350L, I would like some more details:
What is the best price you can offer?
Ech freen mech op déng Äntwert.
Thank you for your mail. Pls quote for foot mounted planetary gearbox suitable for 4kw motor( we don't need motor) and with about 15rpm,
Also quote for bevel helical shaft mounted Hollow output and suitable for 0.75kw motors and in rpms of 45, 23, 12 and 7
Also bevel helical in 2.2kw and 30rpm
Please check the price.It doesn't include freight.
Do you want to ship it by sea or by air?
By the way,please tell me what is the planetary gearbox in the catalog,thank you.
Waart op Är léif Äntwert.
Model Out speed(RPM) Power(KW) Unit EXW price(USD)
KA47 45 0.75KW 371
KA57 23 0.75KW 431
KA77 12 0.75KW 613
KA87 7 0.75KW 801
KA77 30 2.2KW 648
I’m interested in your product High efficiency High torque zq 350 gearbox, I would like some more details.
Ech freeën eis op Är Äntwert.
interested in your product ISO CE certificatied marine engines gearbox zq gearbox JZQ/ZQ1300, I would like some more details.
Ech freeën eis op Är Äntwert.
I’m interested in your product Original quality stepless gear motor zq gearbox JZQ/ZQ350, I would like some more details.
I’m interested in your product Power operated garage door opener 24v/dc motor 500-1000W, I would like some more details.
Can I have a price and availability please for the following:
NMRV040 7.5:1 with 24vDC 750W motor to output approximately 250rpm.
I will be shipping to Napier, New Zealand.
1 for a sample.
50 first order
How many RPM?
worm drive gear motor dc
Shipping by sea please. Can you do this motor on the 040 gearbox?
I need 2x units.
What is the motor rpm, and what is the service factor on the gearbox at this ratio?
merci
Hayden
12V DC Motor mat Getrieber

I’m interested in your product electric portable Wheelbarrow-style Mini Concrete Mixer 350L, I would like some more details.
Currently, we want to buy the COA gearbox of Flender brand with the detail of specification as follow:
RM 8249212/01
COA 315
T2= 13500 Nm
n2= 5,7/min
n1= 206/min
ech = 36
1-CLP PG VG 1000 Oil=72liter
2- Oil=1
BA 6610TU 42004201
Kindly let me know if you have any question
The only gearboxes I see are NMRV050 and larger. The 050 has a 280rpm with a large service factor on the gearbox of 2.4. You should be able to put a 0.75kW 2 pole (or the DC equivalent) on a 040 gearbox easily, which is what I asked for originally.
Hi, I would like to know the price for Free shipping Chinese Wholesale cement mixer 110v 60hz electric motor. I am interested in buying 2 Set/Sets. Please provide uswith a quotation. Thank you.
Free shipping Chinese Wholesale cement mixer 110v 60hz electric motor
Volume 180 litros
110 Volt
I understand that, but what is the number? I expect it to be around 1.2-1.6.
I’m interested in your product WPA Chinese cast iron worm gear reducer /small marine gearbox, I would like some more details.
Ech freeën eis op Är Äntwert.
Wpa type 40 - 155
Ratio 1 : 10 -60for our machine in develepment we are looking for supplyer of electric motor with reductor.
Kindly provide us you quotation for:
1-unit electric motor
rated 108 bhp 3-phase 400V 50Hz 4-poles B3 mounting.
Do you have a pulley system where we need to step up the speed by 1.24?
for our machine in develepment we are looking for supplyer of electric motor with reductor.
Motor idealy 3 Phase 1KW,
Output reductor speed 5 till 10 revolutions.
Do you have something similar in your offer?
Electric gearbox reduction motor speed reductor

Advance Marine Gearbox 16A Helical 1800r/min 1:1 bis 20:1 880nm, 880nm 2000rpm

The catalogue seems to refer to 2, 4 and 6 pole asynchronous motors. I can't see where it refers to the DC options, voltages and speeds.
12V DC Motor mat Getrieber
Input 750w
48v
Verhältnis 7.5: 1
Output speed 250rpm
It's what I asked for right back at my initial inquiry.
DC please. Either 24v or 48v is okay.
2 units please
12V DC Motor mat Getrieber
You have decreased the cost of the gearbox from a NMRV050 down to a NMRV040, and now the price has doubled?
This is very confusing.
1.Our brand is Guomao in China.
2.Yes,we make low-voltage three-phase AC asynchronous induction motors.
3.The output speed of electric motor is 3000RPM, 1500RPM,1000RPM and 750RPM.
4.The quality of our electric motor is good.
5.Yes,our electric motors are ISO certified.
6.The delivery time FOB China is about 5 days.
7.The guarantee period of your motors is 1 year.
8.Yes we can do that.
9.Bearing brand: SKF brand.
10.Yes we have customers in Russia.
Could you tell me the power you need?
Waart op Är léif Äntwert.
One of our client is in need of Gearbox as per below specification. Qty Required is 1 Ea.
méngem
Output power 850 Kw
Actual ratio 43,765
Input speed 1200 1/min
Output speed 27,42 1/min
2-
Output power 120 Kw
Reduction Ratio 1:68
4-Stage Z-type/L-type
3-
Output power 100 Kw
Reduction Ratio 1:66
4-Stage Z-type/L-type
4-
Output power 100 Kw
Reduction Ratio 1:56
4-Stage Z-type/L-type
5-
Output power 75 Kw
Reduction Ratio 1:56.31
4-Stage Z-type/L-type
6-

Output power 45 Kw
Reduction Ratio 1:56.31
4-Stage Z-type/L-type
APPLICATION OF GEAR BOXES:-
mill drive
Main gear unit H3SH 22
Output power 850 Kw
Actual ratio 43,765
Input speed 1200 1/min
Output speed 27,42 1/min
Weight main gear unit (without oil filling) 9800 kg
Oil quality 540 l
Oil viscosity ISO VG 320 (MIN-oil)
Code number our BA 7300 A14
TD 4.218.365 EN

 

 sogears Fabrikatioun

De beschte Service vun eisem Transmission Drive Expert op Är Inbox direkt.

Gleeft un

NER GROUP CO., LIMITED

ANo.5 Wanshoushan Road Yantai, Shandong, China

T + 86 535 6330966

W + 86 185 63806647

© 2022 Sogears. All Rights Reserved.